HOT TUB DELIVERY
& INSTALLATION

 
13_landscape_1.jpg

Delivery Basics

To prepare for the delivery of your hot tub, make sure the delivery path is clear and no obstructions are present. Obstacles such as overhanging tree limbs, awnings, protruding gas meters, water meters, and A/C units can prevent easy access. It may be necessary to remove a gate, part of a fence, or other items in order to dolly the spa to the desired location. If there are more than six consecutive stairs without a landing, you may be required to find another delivery path. Check the measurements on 90◦ turns to make sure the spa will fit through. Occasionally a crane is required to install the spa by lifting it to its final destination. This occurs when the spa has to be taken off of the dolly cart to go over a wall, either because the entry area is too narrow, the eaves are too low, the corner is too tight, or the stairway is too steep. The use of a crane is a common practice and is usually the easiest and safest method for moving a spa when access is difficult. The crane has a truck-mounted boom and can fit easily in your driveway. The Crane Operator will lift your spa over walls, buildings, or any other obstruction and place it as close to the installation site as possible.


delivery-diagram.jpg

A - Obstacles such as overhanging tree limbs, awnings, protruding gas meters, water meters, and A/C units can prevent easy access.
B - WARNING: Watch for power lines.
C - It may be necessary to remove a gate, part of a fence, or other items in order to dolly the spa to the desired location.
D - Check the measurements on 90◦ turns to make sure the spa will fit through.
E - If there are more than six consecutive stairs without a landing, you may be required to find another delivery path.
 

Depending on access to the spa site, your spa may be dollied in either horizontal or vertical position. For your convenience, the following charts provide the dimensions of your spa in either the horizontal or vertical position.

 NOTE: The height of the cart used to dolly your spa into position will need to be added to the height of your spa when calculating the total height clearance required to complete your delivery. Spa carts are typically around 6” (15.24cm) in height. (If necessary, see your authorized Bullfrog Spa dealer for the exact height.)

Technical Dimensions and Layouts

Download the technical dimensions, layouts, and wiring entry point diagrams for all Bullfrog Spas and STIL spa models here.